Hermle Centrifuge Z206A

Description

Hermle Centrifuge Z206A

 

The Z 206 A accepts up to 12 x 15 ml conical and round bottom tubes. For tubes with smaller dimensions we offer
several adapters. For larger volumes we offer an angle rotor for 6 x 50 ml conical and round bottom tubes.

Features

1- Microprocessor with large LCD display
2- Electrical lid lock
3- Pre–selection of the rotor type
4- Active imbalance identification and cut–off
5- Easy rotor exchange
6- Large variety of rotors and accessories
7- Manufactured in accordance to International
8- Safety Regulations, i.e. IEC 61010
9- Improved ventilation system keeps samples cool

 

Distinct Control Panel

1- Simply one–handed operation
2- Easy to program with gloves on
3- Foil keyboard
4- Permanent indication of preset and actual values
5- Selection of speed in both rpm and rcf, with increments of 50/10
6- 10 acceleration and deceleration rates, possibility of unbraked deceleration
7- Pre–selection of the running time from 10 s to 99 h 59 min or continuous

 

Easy Handling:

1- The ergonomic control panel enables a smooth and swift operation process.
2- There is no need to remove surgical gloves during operation.
3- Due to a fast and easy centrifuge lid lock system, time is saved

 

Safety:

1- The Z 206 A has an automatic imbalance shut off system.
2- There is over speed protection incorporated for each rotor.
3- You can only start the model when the centrifuge lid is closed.
4- In case of operation malfunction,an error code will appear on the display. This helps to indicate the reason for the malfunction and to eliminate it.

 

Efficient and Versatile:

1- Despite the high capacity, the design of this model is very compact.
2- Safety for your samples: Even after a long centrifugation run, the temperature of your samples remains under 40°C.
3- Even with the high speed output of 6,000 rpm the working environment is vibration–free with minimal noise output due to its high stability.